meteostation.lha utility/misc - Comments

Chris (82.18.65.211) @ 17 Aug 2013, 02:16.15

Sat, 17 Aug 2013 14:16:15 +0000

By: Chris (82.18.65.211)

btw, the screenshot is live data from my weatherstation, which proves it works :)  The controller which houses the internal temperature sensor sits on top of my SAM440 so I think it's measuring the temperature of that rather than the room temperature.  Some of the other data is nonsense too, as the external part is sited poorly - you can see by comparing to the Wet AppIcon that the external temperature sensor is reading a couple of degrees higher than it probably should be.

Chris (82.18.65.211) @ 17 Aug 2013, 10:50.29

Sat, 17 Aug 2013 10:50:29 +0000

By: Chris (82.18.65.211)

Mine is a cheap one from Maplins, it's just called "wireless weather station", I don't remember the product code but it's similar to this: http://www.maplin.co.uk/usb-touchscreen-wireless-weather-forecaster-228825 
Visually, that's the sort of thing you're looking for. 
 
I haven't done much extensive testing, but it works under OS4/USB.  Mine is connected to a Raspberry Pi using PyWWS under normal circumstances - see http://www.unsatisfactorysoftware.co.uk/weather/

tommysammy (93.221.34.25) @ 14 Aug 2013, 05:20.31

Wed, 14 Aug 2013 17:20:31 +0000

By: tommysammy (93.221.34.25)

Can you recommend one weaterstation? 
Have you tried it on AmigaOS4 over USB? 
Does it works?

Chris (82.18.65.211) @ 14 Aug 2013, 05:11.39

Wed, 14 Aug 2013 17:11:39 +0000

By: Chris (82.18.65.211)

Any which come with EasyWeather should work.  They are made by FineOffset apparently, although most are rebadged.

tommysammy (93.221.34.25) @ 14 Aug 2013, 03:18.02

Wed, 14 Aug 2013 03:18:02 +0000

By: tommysammy (93.221.34.25)

Which weatherstation works with it ?

zzd10h (80.119.216.201) @ 13 Aug 2013, 08:31.27

Tue, 13 Aug 2013 20:31:27 +0000

By: zzd10h (80.119.216.201)

Yes, works better with libusb, 
it's wonderful even without datas...

Chris (82.18.65.211) @ 13 Aug 2013, 07:12.28

Tue, 13 Aug 2013 19:12:28 +0000

By: Chris (82.18.65.211)

Oops, I should have put in the readme that it needs libusb.library. 
 
Obviously the libusb.library auto-init isn't checking whether it actually opened or not, but if you install it it should at least start up.

zzd10h (77.198.106.51) @ 13 Aug 2013, 05:54.30

Tue, 13 Aug 2013 05:54:30 +0000

By: zzd10h (77.198.106.51)

Just wanted to start it. 
Failed with 
assertion 'Libbusbase != NULL" failed: file "autoinit_libusb_base.c", line 31 
 
Of course, I don't have USB meteo station ;)